Description:
Ventilator transmission medium is air, the maximum temperature should
not exceed 80 °C. Induced draft fan transporting gas, the maximum
temperature should not exceed 250 °C. Before Inducing draft fan, must be
installed not less than 85% removal efficiency of dust removal device,
to reduce the dust content of flue gas into the fan , in order to
increase fan’s life
Ventilator and induced draft fan are single-suction fan there are No8, No9, No10, No11.2, No12.5, No14, No16 types.
The angle of the air outlet expressed the position of the fan air
outlet, also can be made to be "right-hand" and "left-hand" . There are 0
°, 45 °, 90 °, 135 °, 180 °, 225 ° angles
Blower are D-type transmission mode, blower and motor is coupled with flexible coupling.
G4-68, Y4-68 centrifugal fan is suitable for below 230t / h steam boiler
in power plant, In no other special requirements, G4-68 type can be
used for mine ventilation and general ventilation. Two types of blower
have the advantages of high efficiency, low noise, and high strength.