Description:
1) This fan is single-suction fan.
2) This fan can be made to be left-handed and right-handed two kinds of
models, being watched from the motor side, the fan impeller rotates
clockwise as "right," the fan impeller rotates counterclockwise as
"left".
3) The angle of the air outlet expressed the position of the fan air
outlet. Both "left" and "right" can be made to be 0 °, 45 °, 90 °, 135
°, 180 °, 225 ° angles.
1) The fan impeller: There are 12 forward curved blades, carry on the
dynamic and static balance and speed test after the rear wheel molding,
to ensure smooth operation, safety and reliability.
2) The chassis: Made of low-alloy steel plate, as snail line body.
3) The Air inlet: Inswept whole structure, connected by bolts on the front cover set
4) The transmission group: Consist of a water bearing box, main axle,
couplings and other parts. The main axle is made of high quality alloy
steel, the bearing box is overall water-cooling structure.
W9-26 high temperature centrifugal fan is suitable for non-corrosive,
unnatural, the maximum temperature must be less than 700 ° C, The
particle concentration of gas is not greater than 150mg / m³
